Do you know that Epson ink cartridges are purposely designed not to be refilled. They contain a chip which measures the amount of ink remaining. When the ink cartridge is empty, the chip is ready to empty. Simply putting more ink in the cartridge will not work. The chip also needs to be reprogrammed to a full state.

Newer chips are purposefully designed not to permit reprogramming, thus this procedure frequently fails. I've seen many beefs on the net of people that bought refilled ink cartridges only to have the printer report that they were empty upon insertion.

Refilling Ink Cartridges Epson

How does the chip know when the ink cartridge is empty? It counts the pages released and estimates ink use. At last it reports the ink cartridge to be empty, frequently when there is still 10-20% left. Once the chip is about to empty, it will not be reset. The chip still needs to be reprogrammed. Some chips can't be reprogrammed at all, so once they report empty they'll stay that way once and for all. This includes Epson T069, T078, T079, T098, T125, T126 and T127 ink cartridges.

But there are larger perils than simply having a cartridge report empty. Inkjet printers squirt ink thru minute holes. If these holes get clogged, it may cause Problems from poor print quality to complete printer failure. All ink has a tendency to coagulate when exposed to oxygen. Otherwise it would never dry.

Now think about an empty ink cartridge which sat around for a while before someone injected more ink. The first remaining 10% of the ink in that cartridge has coagulated. Now it's been refilled. You are losing 10% thanks to the coagulated ink which was there at the time of refill. But the difficulty is rather more major.

If that old ink clot can get free, it can clog and seriously hurt your printer. Even though you re-fill the cartridge instantly, if you're using an ink bottle, there'll be clots along the opening of the bottle. If a single clot makes it to your printer head, you may lose you entire printer in a futile effort to save a few bucks.

Some printers use a vacuum process to suck ink to the heads. If air enters the tiny tubes, the vacuum is damaged. When re-filling cartridges using hypodermic-type needles, it is common for air to enter the tanks.

Then there are other pitfalls. You've got to keep 4 or 6 ink bottles around with 4-6 different hypodermic needles. It is very unlikely to refill without dripping ink. And it's almost unavoidable that at some specific point an ink bottle will be spilled or break. Imagine the mess.

So why refill? It is a untidy process. If you do it yourself, you can’t avoid getting ink all over the place. If someone else does it for you, refilled ink cartridges still tend to leak, clot or bleed air into the printer. You don't save cash. Places which refill often charge about $10 a cartridge. You should purchase a brand new compatible for $3. And you are risking your printer. Re-filling is stupid on so many levels.

Note that re-filling a single-use ink cartridge is not the same as doing so with an ink cartridge specially created for refilling and using special ink dispensers built to eliminate air, leaks and spills.

Ruel Run is a researcher and writer on different subject matters including Epson inks. Should you are interested obtaining a lot more facts click right here: Ink Cartridge For Epson and Epson Refillable Ink.